For updated MSDS Sheets - Please call us at 661-399-7781
Chockfast® Red
Multi-purpose, high strength, deep-pour epoxy grout for fast, permanent alignment of reciprocating and rotating equipment; also used as a polymer concrete for fast reconstruction of worn or damaged foundations. Chockfast® Red provides excellent vibration damping for static and dynamic loads, while its gentle exothermic cure allows for single pours from 2" to 18”.
Chockfast® Red SG
Red SG Chockfast Red SG is a three component, high strength, 100% solids epoxy grouting compound which is used to grout large machinery and to support soleplates in all types of foundation designs with clearances as little as 25mm (1"). Chockfast Red SG has extremely high physical properties and negligible shrinkage, making it ideal for final positioning of critically aligned equipment within close tolerances.
Chockfast® Blue [Chockfast Blue Video]
Blue High chemical and temperature-resistant, high flow epoxy grout for new or retrofit installations in caustic environments. Chockfast® Blue can also be used as a substitute for steel soleplates or rails; normally used in a thickness range of 1”-1 1/2”.
Chockfast® Black
Black Pourable, two-component, deep-pour structural epoxy “chock” used to support and maintain permanent frame alignment under hot-running machinery; allows free flow of air between equipment and foundation to lower foundation temperatures and minimize upward thermal growth; virtually 100% effective bearing underneath supported equipment; normally poured in thickness’ of 1-1/4”—2-1/2”.
[Technical Bulletin] [MSDS Sheets]
Chockfast® Gray
Highly flowable, two-component, thin pour “chock” designed to maintain proper alignment and support of machinery and equipment; able to withstand severe industrial environments with a high degree of both physical and thermal shock resistance.
Escoweld 7505E
The ESCOWELD® 7505/7530 System for machinery grouting and foundation repair offers many benefits designed to simplify equipment installation while providing excellent chemical resistance and vibration damping efficiency for pumps and other critically aligned equipment. Escoweld products are available in North America only.
CWC604
A three-component, high strength, 100% solids, epoxy grouting compound used to grout large machinery and to support soleplates in all types of foundation design. Extremely high compressive strength and negligible shrinkage make it ideal for the final positioning of critically aligned machinery within close tolerances.
