Machine Support Technologies

Epoxy Resin Grout [+]

Chockfast® Red
Chockfast® Red SG
Chockfast® Blue
Chockfast® Orange
Chockfast® Black
Chockfast® Gray
Escoweld 7505E
CWC 604
Grout Support Products

Cement Grouts [+]

Conspec 100
Enduro 50

Industrial Coating [+]

Impax® 5020
Impax® 5020 AR
Impax® 2001 CRE
Impax® HPU
Impax® 650 FS
Impax® 650 SL
Impax® 700
Impax® 100
Impax® 300
Impax® 3300 LVN
SCS 100
FCS 6700
Impax® W/Base Clear
Impax® W/Base Gray

Have a question?
Ask the Grout Mole™
[Click Here]

Servicing:
Southern California,
Southern Nevada, Arizona, Alaska, Hawaii

Industrial Floor Coatings

For updated MSDS Sheets - Please call us at 661-331-0377

	Impax® 5020 A trowelable epoxy surfacing and leveling compound for new and old floors of concrete, wood or steel where a high degree of chemical and abrasion resistance is required. The physical properties of IMPAX 5020 FLOOR RESURFACER are much higher than those of concrete and its excellent abrasion and impact resistance recommend it for high traffic areas. [Technical Bulletin]
	Impax® 5020 AR Acid Resistant Epoxy Floor Resurfacer. A trowel-applied, acid resistant, novolac epoxy resurfacing and leveling system for protecting concrete, wood and steel in many corrosive environments. The high build finish is durable, anti-slip and cures quickly to reduce downtime. [Technical Bulletin]
	Impax® 2001 CRE Novolac Epoxy. A heavy duty, interior, two-component novolac epoxy coating formulated for demanding industrial requirements. It dries quickly to a tough, semi-gloss finish with excellent resistance to alkali, abrasion, corrosion and chemicals. [Technical Bulletin]
	Impax® HPU High Performance Urethane. An interior/exterior, high solids, chemically resistant, polyester aliphatic urethane floor coating. High gloss finish - abrasion and stain resistant, superior color retention and chalk resistance, anti-slip finish available, easily applied by brush, roll, or spray [Technical Bulletin]
	Impax® 650 FS Fast Set Self Leveling Epoxy. A two-component, 100% solids, high-performance, self leveling floor coating designed to cure rapidly for fast recoat or minimal downtime, while maintaining most of the physical properties of the standard IMPAX 650 SL. [Technical Bulletin]
	Impax® 650 SL Self Leveling Epoxy. A two-component, 100% solids, high-performance self leveling floor coating specifically designed to provide an extremely hard wearing, durable, high gloss, seamless, hygienic surface. [Technical Bulletin]
	Impax® 700 High Solids Water Based Epoxy. A two-component, water based, epoxy floor coating specifically designed to provide an attractive, uniform appearance in industrial environments with moderate to high traffic and moderate chemical exposure. The high solids formulation is low odor and low VOC. [Technical Bulletin]
	Impax® 100 One-Component Epoxy Anti-Slip. A single-component, epoxy ester anti-slip floor and deck coating for areas of heavy pedestrian grade traffic. The light duty safety coating offers optimum adhesion to metal, concrete and wood surfaces. [Technical Bulletin]
	Impax® 300 Heavy Duty Epoxy Anti-Slip. A catalyzed epoxy anti-slip coating exhibiting superior chemical resistance to acids, alkalis, solvents, fuels, etc. Easy to mix and apply, this anti-slip coating can be applied to concrete, steel and wood. [Technical Bulletin]
	Impax® 3300 LVN High Solids Clear Epoxy Primer. A clear, high solids, high build, low viscosity primer designed for use with clear finish coats or any of the DecoBlend™ systems. The penetrating primer’s formulation is fast curing, low odor, VOC compliant and reduces bubbling and pinholing that occur when coating porous substrates. [Technical Bulletin]
	Impax® Water Base Clear Clear Epoxy Primer. A thin film, two-component, clear water based epoxy primer/sealer designed for use with most high performance floor coatings. [Technical Bulletin]
	Impax® Water Base Gray High Solids Gray Epoxy Primer. A lead and chromate free, rust inhibitive, two component epoxy primer specifically designed for use in conjunction with Philadelphia Resins coatings applied to metal substrates. It also meets USDA standards for maintenance protective coatings not in direct contact with food infederally inspected meat and poultry plants. [Technical Bulletin]
	Impax® Rust Inhibitive Primer A lead and chromate free, rust inhibitive, two component epoxy primerspecifically designed for use in conjunction with Philadelphia Resins coatings applied to m+etal substrates.It also meets USDA standards for maintenance protective coatings not in direct contact with food infederally inspected meat and poultry plants. [Technical Bulletin]
	Impax® 6700 IMPAX 6700 is a two component, high build, novolac epoxy coating intended as surface protection against severe chemical attack. Excellent adhesion and low viscosity ensures a tight bond to clean, sound concrete surface. [Technical Bulletin]
	Impax® Flexible Joint Sealant This is a two-component, 100% solids, polymer hybrid containing both urethaneand epoxy resins that provide a resilient filler for expansion joints. This chemistry allows excellent flexuralstrength and elongation while maintaining impressive tensile strength. It has good adhesive strength andflexibility over a wide temperature range. [Technical Bulletin]
	Custom Floor Coatings Call us today about custom floor coating!